Drywall Hole Repair Rockville, MD: Doorknob, Anchor and Impact Holes

A doorknob dent or a row of old TV anchor holes makes a whole room look worn. Our drywall hole repair patches any size, from nail holes to fist-size damage, and matches the texture so the spot disappears under paint. Serving King Farm, Twinbrook, Fallsgrove and all of Rockville, with a fixed price before we start.

📞 Call (227) 250-0050 Get a Free Estimate
  • Free On-Site Estimate
  • Fixed Written Price
  • Texture Matched
  • Dust-Controlled

Rockville’s Hole Patching Specialists, Not a Generic Handyman

We patch holes in walls and ceilings. Not tile, not plumbing, not painting. Doorknob dents, anchor and screw holes from old TVs and shelves, and fist-size damage from moving day all get the same care: a solid patch, a flat finish and texture that matches the wall.

Small holes get a patch. Holes bigger than a doorknob get a new piece of drywall screwed to wood backing, so the patch doesn’t flex or crack later.

Hole patching is one part of our drywall repair service in Rockville, which covers walls and ceilings of every kind.

Call Now for a Fixed Price

Three Kinds of Holes We Fix Most

Small holes (under 1 inch)

Nail, screw and anchor holes. Filled, sanded flat and primed.

Medium holes (1 to 6 inches)

Doorknob dents and old outlet cutouts. Patched, taped and finished in thin coats.

Large holes (over 6 inches)

Impact damage and old vent or pipe openings. Cut square, backed with wood, filled with new board and finished.

Ceiling holes

Holes from old light fixtures and fans, backed and finished flat overhead.

Each size needs its own fix. A big hole filled only with compound shrinks, sags and cracks.

Who We Help

  • Homeowners with a doorknob dent behind a door
  • Renters and landlords patching anchor holes before move-out
  • Sellers getting walls ready for listing photos
  • Parents dealing with a hole from a stray toy or a hockey stick
  • Anyone who moved a TV and left big anchor holes behind
Book a Free Estimate

Why Do Rockville Walls Get So Many Holes?

Holes come from how people live in a house, and Rockville homes see a lot of moving in and out.

  • Move-in season, May to August: Furniture scrapes, dropped dressers and anchor holes from mounted TVs.
  • Spring listing season: Sellers patch every hole before photos and open houses.
  • Tight halls in three-level colonials: Walls take hits when furniture goes up and down the stairs.
  • Doors without stops: A doorknob can punch through half-inch board in one swing.

A door stop costs a few dollars. Fitting one after the repair keeps the same hole from coming back.

Every Kind of Hole, Every Size

Holes look alike from across the room, but each one needs a different patch. Here is how we handle the ones we see most in Rockville homes and offices.

Nail, Screw and Anchor Hole Repair

Picture frames, shelves and TV mounts leave small holes and plastic anchors behind. We pull or sink each anchor, fill the hole with setting compound, sand it flat and prime it. Filling a row of anchor holes this way keeps them from showing as little bumps under new paint. Drill holes from old blinds and curtain rods get the same treatment.

Doorknob Hole Repair

A door without a stop can punch a round hole straight through half-inch board. We cut the damage back to a clean square, set a patch that fits it tight, and finish it in thin coats. Before we leave, we point out where a door stop would keep the same hole from coming back next month.

Large Hole Repair: Holes Bigger Than 6 Inches

Big holes can’t be filled with compound alone. It shrinks, sags and cracks. We cut the opening square, screw wood backing inside the wall, fit a new piece of drywall and tape every edge. Three thin coats and a matched texture make the patch flat. If a wall has too many big holes to patch well, we cover it through drywall replacement instead.

Electrical and Plumbing Hole Repair

Electricians and plumbers often open walls to run wire, move an outlet or reach a pipe. They leave the hole for someone else to close. We fit new board into those openings, tape and finish them, and blend the texture so you can’t tell where the access hole was. It pairs well with new drywall installation if a whole wall was opened.

Ceiling Hole Repair

Old light boxes, removed fans and a foot through the attic floor all leave holes overhead. Ceiling patches need solid backing because gravity pulls on them every day. We back the hole, fit new board and match the ceiling texture. For cracks, sags and stains overhead, see our ceiling drywall repair page.

Drywall Patch Repair on Plaster and Older Walls

Many homes in Twinbrook, East Rockville and the West End still have plaster walls. Plaster and plasterboard need a bonding agent so the new patch grips the old surface. We use setting compound made for plaster and keep the patch at the same depth as the wall around it. Plaster that is cracked instead of holed goes through our crack repair process.

Hole Repair and Finishing That Hides the Patch

A flat patch with the wrong texture still shows every time light hits the wall. We feather each coat wide, sand with vacuum sanders and match orange peel, knockdown or smooth walls. Tricky finishes get tested on a sample board first, the same way we handle drywall texture repair. The patch is primed and ready for your paint.

📞 Call (227) 250-0050

Our 5-Step Drywall Hole Repair Process

  1. Free look and fixed price

    We measure each hole, check what’s behind it and give you a written price.

  2. Protect the room

    Floors and furniture are covered, and dust barriers go up.

  3. Cut and back

    Larger holes are cut square and backed with wood so the new piece sits firm.

  4. Tape and finish

    Mesh or paper tape, then two or three thin coats of compound with drying time between them.

  5. Texture, prime and clean up

    We match the texture, prime the patch and take the dust and offcuts with us.

What’s included in a hole repair visit?

The patch, the tape and compound coats, sanding with vacuum sanders, texture matching and primer. Cleanup is part of every job. Painting is not, so the area is left ready for your paint.

Want the full picture, from the first call to cleanup? Read how we work.

  • Any Size Hole
  • Wood-Backed Patches
  • Texture Matched
  • Dust-Controlled

Landlords and Sellers: Holes Fixed Before Move-Out or Listing

  • One visit for every hole in the unit
  • Anchor holes filled flat so they don’t show under new paint
  • Lockbox access is fine, and we text photos when done
  • Walls left primed for your painter
  • One written price per unit

Deposit walk-throughs and listing photos show every dent. Fixing them all in one visit saves time.

How we work: Shield Drywall Rockville connects your job with a local drywall professional who does the on-site work. You get a written, fixed price before anything starts, and the work follows the process on this page. About Shield Drywall Rockville.

Hole Repair Answers

Can I patch a drywall hole myself?

Nail and screw holes, yes, with spackle and a putty knife. Holes bigger than a doorknob need backing and several coats to stay flat, and matching the texture is the hard part.

How big a hole can be patched?

Almost any size. Past about 12 inches across, we cut out a clean rectangle and fit a new piece of drywall into it.

Got Questions About Hole Repair?

How long does hole repair take?

Most jobs take one or two short visits, because each coat of compound has to dry. Setting compound speeds up small patches.

Will the patch show after painting?

Not when it’s feathered wide and textured to match. We prime it so it takes paint like the wall around it.

Do you fix holes in ceilings too?

Yes. Ceiling holes get backing and the same finish. Bigger ceiling damage is covered on our ceiling repair page.

Can you patch holes left by TV mounts?

Yes. Large anchor holes and torn paper around them are cut back, filled and finished flat.

Do I need to be home?

Someone needs to let us in and approve the price. After that, you can leave us to work.

Is a drywall repair kit from Home Depot or Lowe’s good enough?

Kits and self-stick mesh patches work for small holes behind furniture. On a wall people see every day, the edges of a kit patch often show, and the texture doesn’t match. Holes bigger than a doorknob need backing, which kits don’t include.

How do you fix a hole in drywall bigger than 6 inches?

Cut the hole into a clean square, screw wood strips inside the wall as backing, fit a new piece of drywall, then tape and finish it in thin coats. It takes one to two days because each coat has to dry.

More answers are on our drywall FAQ page.

If the patch shows once the wall is painted, we come back and redo the texture.

More Drywall Services in Rockville

Texture RepairOrange peel, knockdown, popcorn and smooth walls. Crack RepairSeam, stress, hairline and plaster cracks re-taped. Ceiling RepairCeiling cracks, sags, stains and popcorn patches. Corner Bead RepairDented, cracked and rusted corners made straight. Drywall ReplacementSections and rooms past patching, replaced. Water Damage RepairLeak stains, soft board and flood cuts rebuilt. Drywall InstallationBasements, additions, ceilings and new walls. Residential DrywallHomes, town homes and condos, room by room. Commercial DrywallOffices, shops and rentals, after hours.

Where We Work in Rockville

From Rockville Town Square to Lake Needwood, we cover the 20850, 20851, 20852, 20853, 20854 and 20855 ZIP codes. Contact us to check your street.

Got a Hole in the Wall?

Send a photo or book a free visit, and get a fixed price for every hole in the house.

📞 Call (227) 250-0050 Get a Free Estimate